Garage Door Opener Repair: What To Do When Your Garage Door Opener Stops Working

by Curtis

Batteries, Garage

This post may contain affiliate links. If you buy thru these links, we may earn a commission at no additional cost to you.


It’s really the pits when you pull up to the garage door at your home and it refuses to open.

Fortunately, there are a number of options to remedy this problem.

Here’s what you need to know to repair your garage door opener, replace batteries in the remotes, or reprogram your system…

Types Of Garage Door Openers

For starters, garage door openers come in 3 types:

Troubleshooting for all 3 types of garage door openers is pretty much the same, since the working parts are similar:

  1. There is a transmitter or handheld remote in your car and a receiver that accepts the signal from the remote and tells the drive system what to do.
  2. There is a warning device that determines if anything is present within the path of the garage door that would prevent the garage door from closing properly.
  3. There is a wired-in control button that allows you to operate the garage door from inside the garage.

This video demonstrates how a typical garage door opener system is installed:

How To Find The Source Of The Problem

Determining which component of the garage door opener system is causing the problem is pretty straightforward.

  • If the remote in your car won’t activate the opener but the hard-wired button on the garage wall operates the garage door opener properly, then the problem is contained within the radio transmitting portion of the garage door opener.
  • If the remote in your other car (most systems come with 2 remotes) works the garage door opener, then the problem is within the remote that doesn’t work.
  • If neither garage door opener remote will open the garage door, then the problem is most likely in the receiver that’s mounted on the garage door opener motor.

Your Garage Door Opener Repair Options

First and foremost, you’ll want to check the batteries in your garage door opener remote. Nine times out of ten, that’s the reason that a garage door opener won’t open. Fortunately, that’s a really simple fix!

There’s usually a 9-volt battery in the keypad itself, as well as a watch-type battery (or maybe a standard AA or AAA battery) in each of the handheld remotes for your garage door opener.

Here’s how to replace the garage door opener keypad battery.

Here’s how to replace the garage door opener remote batteries.

Beyond testing and replacing batteries in your garage door opener remotes, there is little that you as a homeowner can do with the electronic transmit-and-receive portion of the garage door opener.

Does this mean you must tear out the whole garage door opener and buy a new one? Absolutely not.

Fortunately, parts for the most common brands of garage door openers are readily available on the Internet. Keep this in mind if you happen to be in the market for a new garage door opener system. Sticking with a reliable name brand will assure that you will be able to get parts many years down the road.

How To Repair The Garage Door Opener Yourself

Repairing a garage door opener receiver is usually just a matter of removing a couple wires for the old one and attaching the wires for the new one.

Programming a remote is simple. Older units will have a series of dip switches in both the remote and the receiver. All you have to do is make sure both units have all the switches in the same position. Modern garage door opener systems have a “learn” button which is used to match the 2 components together.

For many garage door opener repairs, the level of technical expertise required is relatively easy. This video confirms the fact that garage door opener repairs are pretty straightforward:

More Garage Door Opener Repair Tips